| Specifications |
| Body |
• Dimensions (H x W x D): 110 mm x 165 mm x 165 mm (4.33″ x 6.49″ x 6.49″) • Weight: 1030 g (36.33 oz) • Colour: White |
| Hardware Variants |
• Built-in Omni Directional Antennas • 5 GHz Antennas 5.4 dBi • 2.4 GHz Antennas 3.2 dBi • BLE/802.15.4 Antennas 3.3d Bi |
| Wi-Fi Radio |
AP type • Outdoor Hardened, Wi-Fi 6 dual radio, 5 GHz 2x2 MIMO and 2.4 GHz 2x2 MIMO Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1) • 5GHz: Two spatial stream Single User (SU) MIMO for up to 1.2 Gbps wireless data rate with individual 2SS HE80 802.11ax client devices, or with two 1SS HE80 802.11ax MU-MIMO capable client devices simultaneously • 2.4GHz: Two spatial stream Single User (SU) MIMO for up to 574 Mbps (287 Mbps) wireless data rate with individual 2SS HE40 (HE20) 802.11ax client devices or with two 1SS HE40 (HE20) 802.11ax MU-MIMO capable client devices simultaneously • Up to 256 associated client devices per radio • Up to 16 BSSIDs per radio Supported frequency bands (country-specific restrictions apply) • 2.400 to 2.4835 GHz (ISM) • 5.150 to 5.250 GHz (U-NII-1) • 5.250 to 5.350 GHz (U-NII-2A) • 5.470 to 5.725 GHz (U-NII-2C) • 5.725 to 5.850 GHz (U-NII-3/ISM) • 5.850 to 5.875 GHz (U-NII-4) • Available channels: Dependent on configured regulatory domain • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum Supported radio technologies • 802.11b: Direct-sequence spread-spectrum (DSSS) • 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) • 802.11ax: Orthogonal frequency-division multiple access (OFDMA) with up to 16 resource units (RU) Supported modulation types • 802.11b: BPSK, QPSK, CCK • 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (proprietary extension) • 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM (proprietary extension) • 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM • 802.11n high-throughput (HT) support: HT 20/40 • 802.11ac very high throughput (VHT) support: VHT 20/40/80 • 802.11ax high efficiency (HE) support: HE20/40/80 Supported data rates (Mbps) • 802.11b: 1, 2, 5.5, 11 • 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 • 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40), 400 with 256-QAM • 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT80), 1,083 with 1024-QAM 802.11ax (2.4GHz): 3.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40) • 802.11n/ac/ax Packet aggregation: A-MPDU, A-MSDU Transmit power • Configurable in increments of 0.5 dBm Maximum (conducted) transmit power (limited by local regulatory requirements) • 2.4 GHz band: +23 dBm per chain, +26 dBm aggregate (2x2) • 5 GHz band: +23 dBm per chain, +26 dBm aggregate (2x2) • Note: conducted transmit power levels exclude antenna gain. Maximum EIRP (limited by local regulatory requirements) • 2.4 GHz band: 565: 29.2 dBm EIRP 567: 33 dBm EIRP • 5 GHz band: 565: 31.4 dBm EIRP 567: 32.7 dBm EIRP • Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks • Maximum ratio combining (MRC) for improved receiver performance • Cyclic delay/shift diversity (CDD/CSD) to enable the use of multiple transmit antennas • Short guard interval for 20-MHz, 40-MHz, and 80-MHz • Space-time block coding (STBC) for increased range and improved reception • Low-density parity check (LDPC) for high-efficiency error correction and increased throughput • Transmit beam-forming (TxBF) for increased signal reliability and range 802.11mc Fine Timing Measurement (FTM) • for precision distance ranging |
| Interfaces |
E0: 10/100/1000BASE-T (RJ-45) • Auto-sensing link speed and MDI/MDX • PoE-PD: 48Vdc (nominal) 802.3at/bt (Class 3 or higher) • 802.3az Energy Efficient Ethernet (EEE) Bluetooth 5 and 802.15.4 radio • 2.4 GHz • Bluetooth 5: up to 8 dBm transmit power and -95 dBm receive sensitivity • Zigbee: up to 8 dBm transmit power and -97 dBm receive sensitivity • Up to 4 dBm transmit power (class 2) and -91 dBm receive sensitivity Visual indicator (multi-color LED) • For system and radio status Reset button • Factory reset (during device power up) • USB-C console interface |
| Power |
• Maximum (worst-case) power consumption: 15.6W • Maximum (worst case) power consumption in idle mode: 4.2W • Maximum (worst case) power consumption in deep-sleep mode: 1.7W • Power sources sold separately • Power over Ethernet (PoE+): 802.3at-compliant • When powered by 1x 802.3at, there are no restrictions • When powered by 1x 802.3af with IPM enabled, the AP will start up in unrestricted mode, but may dynamically apply restrictions depending on the POE budget and actual power. The feature restrictions can be programmed. • When powered by 1x 802.3af with IPM disabled, the AP will lower the 2.4Ghz radio to 1x1:1 |
| Mounting |
Optional mounting kits • AP-OUT-MNT-V1A: Outdoor Pole/Wall Long Mount Kit • AP-270-MNT-V2: Outdoor Pole/Wall Short Mount Kit • AP-270-MNT-H1: Outdoor AP Hanging or Tilt Install Mount Kit • AP-270-MNT-H2: Outdoor Flush Wall or Ceiling Mount • AP-270-MNT-H3: Outdoor AP Hanging or Dual-Tilt Install Mount Kit |
| Environmental |
Operating conditions • Temperature: -40° C to +55° C (-40° F to +131° F) with full solar loading • Humidity: 5% to 95% non-condensing internal • Rated for operation in all weather conditions Storage and transportation • Temperature: -40° C to +70° C (-40° F to +158° F) Operating Altitude • 3,000 m Water and Dust • IP66/67 Salt Tolerance • Tested to ASTM B117-07A Salt Spray 200hrs Wind Survival • Up to 165 Mph Shock and Vibration • ETSI 300-19-2-4 |
| OS | • ArubaOS and Aruba InstantOS 8.7.1.0 • ArubaOS 10.3.0.0 |
